Rockchip Batch Tool For Mac
This is a common guide for reflashing RockChip based devices. All RK SoC (RK3066, RK3188, RK3288, RK3229, RK3328, RK3399 and so on) supports the same applications and drivers for Host system, if 3rd party producers do not add any other limitations or special options. Differences can be in hardware parts, so you need to detect OTG port and recovery buttons correctly.
Notice: this guide is 100% working with Ugoos RK devices.Serial key just dance 2018.
BEFORE START
What do you need:
- Image file
- Host PC
- USB OTG Cable
- Supported host OS: Windows XP (32/64bit) Windows 7 (32/64bit) Windows 8 (32/64bit) Windows 10 (32/64bit)
The first thing you need is to download the archive with firmware. Inside archive, you find:
- BatchTool or Android Tool - tool for reflashing (separate Android Tool and drivers you can download HERE)
- DriverAssitant - tool to install drivers and firmware image file
- Firmware image
- BTW, if you need, you can download Rockchip Batch Tool v1.8 from here and Rockchip FactoryTool v5.0 from here. If you need a tool like this for Allwinner devices then download PhoenixCard v3.1.0 from here. Rockchip Create Upgrade Disk Tool v1.46 helps you to install firmware on Rockchip device from Micro SD card.
- Rockchip Batch Tool download file is only 3.8 MB in size. Rockchip Batch Tool was filed under the Desktop Publishing category and was reviewed in softlookup.com and receive 3.7/5 Score. Rockchip Batch Tool has been tested by our team against viruses, spyware, adware, trojan, backdoors and was found to be 100% clean.
Similar Software for Mac. Install fon-flash-cli on Mac OSX; Install flasm on Mac OSX; Install yamdi on Mac OSX; Install libming on Mac OSX; Install Flash Decompiler Trillix on Mac OSX; Install f3 on Mac OSX; Install flashrom on Mac OSX; Install libquvi on Mac OSX; Install Adobe Flash Player on Mac OSX; Install flvstreamer on Mac OSX. Inside the zip file, you will find the SDFirmwareTool.exe and a Word Document with detailed instructions on how to use the Rockchip SD Firmware Tool correctly. Attention: Using the Rockchip SD Firmware Tool can also damage your device if not used correctly. Proceed with caution. Rockchip Batch Tool is a compact program designed to help you update the firmware of your tablet or mobile device. It can be useful if you want to upgrade the software or completely replace it with. Rockchip Batch Tool Usage:-Rockchip Batch Tool is used to flash Rockchip powered Android Smartphone & Tablet. 1- Download the package & extract Rockchip Batch tool folder. 2- Double click on RKBatchTool.exe to launch the tool on PC. 3- Click on the Box right to FW Path. 4- Select the firmware to be flashed which will lead to Loading of firmware. Description: RockChip RK Batch Tool v.1.5 - is an utility for flashing Android tablets and MID devices based on Fuzhou Rockchips (RK2818, RK2808A, RK2918, RK3066) SoC and manufactured by Explay, Ritmix, ONDA, Teclast, Texet, etc.
INSTALLING DRIVERS
Launch RK DriverAssitant and press “Install Driver”
Apply all changes and warnings during installation until finishing message
CONNECTING TO PC
Run Batch tool or Android tool on your host PC.
In order to connect device with Host PC and run bootloader mode you should perform following steps:
1. Plug off device power adaptor.
2. Connect device to computer via usb OTG port, much better to use certified OTG USB cable from package.
3. Run Batch tool or RK Android tool
4. Hold the hardware recovery button.
5. Plug in power adaptor and Turn on device if not turning on automatically.
Tip: if you can’t hold recovery button or it’s broken you can reboot to bootloader from Ugoos power menu.
RECOVERY BUTTONS AND OTG USB PORTS LOCATION ON UGOOS DEVICES YOU CAN SEE IN THE END OF THIS INSTRACTION.
IF YOU USE ANDROID TOOL:
In Android Tool choose “Upgrade Firmware” tab. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “
Click “Firmware” button and specify the path to the firmware file. You need to wait until the program download information about the firmware, then it will display report on the screen. Now click “Upgrade” button to start reflashing device. At the end, you will see a report indicating a successful operation.
For flashing dualboot or clear linux firmware (for example dualboot UT3/UT3s/UM3 firmwares)
Run Android Tool. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “ In Android Tool choose “Download Image” inset. Default program configured to flash 'clear' android on your device. If you want install “Dualboot” or “Clear Linux” click right mouse button by program window, and then select “Load config”.
3. Then choose one of configurations files:
config.cfg - if want flash only Android
config_dualboot.cfg - if want flash dualboot
config_linux.cfg - if want flash only linux
3. Now click the “Run” button to start reflashing device. At the end, you will see a report indicating a successful operation.
IF YOU USE BATCH TOOL:
Main difference between Android tool and Batch tool is Batch tool can reflash several devices at the same time (6 max).
Run the Rockchip Batch Tool and click on the “…” to choose file with firmware. If you did everything correctly and the driver is installed on your computer, you will see green light on one of the indicators.
Now click the “Upgrade” button to the firmware of the device. At the end, you will see a report indicating a successful operation.
OTG usb ports and recovery buttons on Ugoos devices:
Ugoos UT4/UT3+/UT6
Recovery button and USB OTG port is on the right side
Ugoos UT3/UT3s (old version)
Rockchip Batch Tool For Macbook
Recovery button and USB OTG port is on the right side
Ugoos UM3/UM4
Recovery button is from the left to antenna connector
OTG USB port is left one.
Ugoos UT5 Pro
Ugoos UM2/openemu-bios-pack-10.html.
Ugoos UT2
Ugoos UT1
Rockchip Batch Tool For Mac Download
Find us: